Products & Service
Our Locations
For Direct Calls
cell no :+98673 32457.
TRACS ACTUATOR DRIVES ALLIED PRODUCTS Registered Office :
Address : B-14,SURYAKIRAN, 105–MODEL
TOWN, FOUR BUNGALOWS,
ANDHERI(WEST),
                   MUMBAI – 400053
Contact:  Tel - +91 22 2631 1192.
Fax. - +91 22 2632 7389.
 
Home | Product & Service | material handling gates

Product & Service - material handling gates

CONVENTIONAL FLAP GATE
CONVENTIONAL FLAP GATE
MOST IDEAL FOR DIVERTING APPLICATION, IN TYPICAL BULK MATERIAL HANDLING SYSTEM. HISTORICALLY PROVEN EQUIPMENT WIDELY USED AT ALL CONVEYOR JUNCTION POINTS, FOR MATERIAL DIVERSION AND SUITABLE FOR ON – OFF DUTY
 
  • Quick response time.
  • Very cost effective due to very less operating parts and ease of maintainenece.
  • Provided with variety of construction options, to suit budget requirements.
  • Optional gate avaialbe in wiper type flap design with seals in rubber / metal construction, to achieve perfect shut off, while handling fine material.
  • Suitable for variety of actuation options.
  • Two – way / three way design with facility of changing flap, with out dismantling from chute possible, with our new improved construction.
BUCKET TYPE FLAP DIVERTOR
MOST IDEAL FOR DIVERTING APPLICATION, IN MATERIAL HANDLING SYSTEM, CONVEYING HYGROSCOPIC MATERIAL / FINE POWDER WITH MOISTURE CONTENTS GREATER THAN 6%. APPLICATION MOSTLY IN FERTILISER PRODUCT HANDLING PLANT / THERMAL POWER STATION AND SUITABLE FOR ON – OFF DUTY.
 
  • Material diversion of the flap, with out cutting thru the flow.
  • Very cost effective due to very less operating parts and ease of maintainence.
  • Provided with variety of construction options, to suit budget requirements.
  • Suitable for variety of actuation options.
 
BELL TYPE DIVERTOR FLAP GATES
MOST IDEAL FOR DIVERTING APPLICATION, IN MATERIAL HANDLING SYSTEM, CONVEYING BULK SOLID IN EXCESS OF 25mm. APPLICATION MOSTLY IN CEMENT / STEEL & THERMAL POWER STATION AND SUITABLE FOR ON – OFF DUTY.
 
  • Bell shaped / pendulum type flap construction ensures material diversion of the flap, with out cutting thru the flow.
  • Very cost effective due to very less operating parts and ease of maintainence.
  • Provided with variety of construction options, to suit budget requirements.
  • MOTORISED ACTUATION OPTION MOST PREFERRED FOR THIS TYPE OF GATES.
HEAVY DUTY FLOW DIVIDOR GATE
MOST IDEAL FOR DIVERTING / PROPORTIONATELY DIVIDING THE MATERIAL FLOW, IN TYPICAL BULK MATERIAL HANDLING SYSTEM. IT PROVEN EQUIPMENT WIDELY USED FOR HANDLING BIG SIZED BULK SOLIDS WHICH ARE ABRASSIVE IN NATURE.
 
  • Heavy duty construction, most suitable for dusty environments.
  • Designed To Take High Impact Of Falling Material
  • Offered with variety of liner options, to suit application requirements.
SECTOR GATE
LOCATED BELOW MATERIAL STORAGE HOPPERS / SILOS, FOR EXTRACTION OF MATERIAL, IN PRE-SET / CONTROLLED MANNER.
 
  • Quick response time.
  • Very cost effective due to very less operating parts and ease of maintainenece.
  • Provided with variety of construction options, to suit budget requirements.
  • Suitable for variety of actuation options.
  • Low cost single sector gate option, also available for quick shut off application, typically in a rapid loading system, to work in conjuction with a weigh controller.
BUTTERFLY GATE
MOST IDEAL FOR ISOLATION APPLICATION, IN TYPICAL SEED PROCESSING PLANT. WIDELY USED BELOW WEIGH HOPPER AND SUITABLE FOR CONTROL DUTY.
 
  • Quick response time.
  • Very cost effective due to very less operating parts and ease of maintainenece.
  • Provided with variety of construction options, to suit budget requirements.
  • Suitable for variety of actuation options.
  • Optional gate seals in rubber / metal construction, to achieve perfect shut off, while handling powdered material.
CONVENTIONAL SLIDE GATES
LOCATED MOSTLY BELOW MATERIAL STORAGE HOPPERS / SILOS, FOR ISOLATION OF MATERIAL.
 
  • Provided with variety of construction options, to suit most fine powder &larger bulk solids.
  • Suitable for variety of actuation options, depending on application & response time.
  • Our designs offered for both light & heavy duty application, with choice of roller designs.
  • Special design of gates located in chutes, can be maintained with out dismantling from the chute assembly.
RACK AND PINION GATES
LOCATED MOSTLY BELOW MATERIAL STORAGE HOPPERS / SILOS, FOR ISOLATION OF MATERIAL.
 
  • Provided with variety of construction options, to suit most fine powder &larger bulk solids.
  • Suitable for variety of actuation options, depending on application & response time.
  • Our designs offered for both light & heavy duty application, with choice of roller designs.
  • All gears are machine cut for perfect fit.
  • Special design of gates located in chutes, can be maintained with out dismantling from the chute assembly.
 
LEAKPROOF SLIDE GATES
LOCATED MOSTLY BELOW VERY LARGE MATERIAL STORAGE SILOS, FOR ISOLATION OF MATERIAL FLOW.
 
  • As the name suggests, the gate is prvided with special seals, to make it leak proof, hence finds wide acceptance in weighing & batching applications.
  • Suitable for variety of actuation options, depending on application & response time.
  • Our designs offered for both light & heavy duty application, with choice of roller designs.
 
MULTI OPENING SLIDE GATES
LOCATED MOSTLY BELOW VERY LARGE MATERIAL STORAGE SILOS, FOR ISOLATION OF MATERIAL FLOW.
 
  • As the name suggests, the gate is provided with multi – opening, to make it respond quickly to part load material discharge as per system requirements.
  • Very heavy in construction & mostly hydraulic / electrically operated.
PIN GATES
IDEAL LOW COST SOLUTION FOR ISOLATION OF MATERIAL FLOW, IN LARGE STORGE HOPPERS.
 
  • Widely used for isolation of matrial flow in hopper, for maintenance of down stream equipment, with out emptying the hopper.
  • Very cost effective due to very less operating parts and ease of maintainenece.
  • Provided with variety of construction options, to suit budget requirements.
  • Optional gate available in motorised construction, for remote operation.